Klasse ALL-IN-ONE Polish & Sealant

Klasse ALL-IN-ONE Polish & Sealant:

"Application Tip: Klasse All-In-One wipes on easily with a damp terry cloth or terry applicator pad but here’s an application method that is faster and produces phenomenal results.

Take a dry Viper Microfiber Detailing Cloth (not the Glass Cloth) and fold it until it’s palm sized (5” to 6” square). Lightly mist the cloth with Eagle One Wet Wipe N’ Shine. Apply a dab of All-In-One to the cloth about the size of a nickel. Apply to one section of the car at a time (i.e. a door, 1/2 of the top, etc.). You’ll notice that it wipes on very easily (thanks to the lubricating action of the Wet Wipe N’ Shine) and leaves virtually no residue. When you’re done with one section, take a second, dry Viper Detailing Cloth and re-wipe the area to remove any residual residues.

Continue walking around the vehicle doing one section at a time. Re-fold your application cloth as needed to keep the application surface fresh. Continue with a light mist of Wipe N’ Shine and a small dab of All-In-One to do each section of the vehicle.

If you’re a perfectionist, you can repeat the above steps using Klasse High Gloss Sealant Glaze. It takes less Glaze to do the same area so start with a dab the size of a dime. You do not need to wait for the All-In-One to dry before applying the Sealant Glaze. It can be applied immediately."